GC Gold Label Luting & Lining Cement 1:1 Glass Ionomer Luting Light Yellow

For use only by a dental professional in the recommended indications.

1. Cementation of metal-based inlays, onlays, crowns, bridges and posts

2. Cementation of high strength (zirconia based) all ceramic crowns and bridges

1. Pulp capping.

2. Avoid use of this product in patients with known allergies to glass ionomer cement.

1. TOOTH PREPARATION 

 a) Prepare tooth in usual manner. For pulp capping, use calcium hydroxide.

 b) Clean the prepared tooth with pumice and water.

 c) Rinse thoroughly with water. Remove excess moisture by blotting with a cotton pellet or gently blowing with oil-free air.

 DO NOT DESICCATE. Prepared surfaces should appear moist (glistening).

2. RESTORATION PREPARATION

 Pre-treat the restoration and handle according to manufacturer's instructions.

3. DISPENSING OF POWDER AND LIQUID

 a) The standard powder to liquid ratio is 1.8g/1.0g (1 level scoop of powder to 2 drops of liquid).

 b) For accurate dispensing of powder, lightly tap the bottle against the hand. Do not shake or invert.

 c) Hold the liquid bottle vertically and squeeze gently.

 d) Close bottles immediately after use.

4. MIXING Dispense powder and liquid onto the mixing pad. Using the plastic spatula, add all the powder to the liquid. Mix rapidly for 20 seconds.

 Note: When mixing larger amounts, divide the powder into two equal parts.

Mix the first portion with all of liquid for 5 seconds.

Incorporate the remaining portion and mix thoroughly for 15 seconds (total 20 seconds).

5. CEMENTATION

 a) Coat the internal surface of the restoration with sufficient cement. Seat immediately. At 23°C (73°F) working time is 2 minutes from start of mixing. Higher temperatures shorten working time.

 b) Maintain moderate pressure on the seated restoration.

 c) Start removing excess cement when the excess cement feels rubbery.

 d) Finishing can be started 4 minutes 30 seconds after seating the restoration.

STORAGE Recommended for optimal performance, store in a cool and dark place (4-25°C) (39.2-77.0°F). SHADE Light yellow

1-1 package: 35 g powder, 25 g (20 mL) liquid, powder scoop (0.225 g), mixing pads (No. 20)